Gcode

G-code est un code de programmation pour les machines à commande numérique.

Référence

• https://fr.wikipedia.org/wiki/Programmation_de_commande_num%C3%A9rique
• https://reprap.org/wiki/G-code/fr

Application

• pas d'application
  

Exemple de Gcode

; generated by Slic3r 1.3.1-dev (Build 18ddd3a36dc69d81fb9b7440498bff9e1dde8b7e) on 2023-11-27 at 22:31:07

; external perimeters extrusion width = 0.44mm (3.16mm^3/s)
; perimeters extrusion width = 0.40mm (8.05mm^3/s)
; infill extrusion width = 0.80mm (22.07mm^3/s)
; solid infill extrusion width = 0.40mm (5.03mm^3/s)
; top infill extrusion width = 0.30mm (1.77mm^3/s)

M107
G92 E0
M190 S80 ; set bed temperature and wait for it to be reached
M104 S230 ; set temperature
G28 ; home all axes
G1 X50 Y50 Z50 F10000
; Filament gcode

M109 S230 ; set temperature and wait for it to be reached
G21 ; set units to millimeters
G90 ; use absolute coordinates
M82 ; use absolute distances for extrusion
G92 E0
G1 E-2.00000 F2400.00000
G92 E0
G1 Z0.500 F15000.000
G1 X110.289 Y141.091 F15000.000
G1 Z0.300 F15000.000
G1 E2.00000 F2400.00000
G1 F2400.000
G1 X112.534 Y140.006 E2.16656
G1 X114.771 Y139.679 E2.31759
G1 X117.398 Y139.679 E2.49310
...
...
G1 X115.919 Y148.331 E3.73507
G1 X115.579 Y148.331 E3.74527
G1 X115.518 Y148.392 E3.74784
G1 E1.74784 F2400.00000
G92 E0
G1 Z13.400 F15000.000
M107
; Filament-specific end gcode 
;END gcode for filament

G1 E-10 F9000
M104 S0 T0 ; turn off temperature
M140 S0 ; turn off bed
G1 X300 Y300 F10000
M84 ; disable motors

•